上海頤品自動化科技有限公司

CMP/Hawke防爆格蘭，CCG/Peppers防爆格蘭，Eaton/Cooper/OCSG防爆格蘭防爆接線箱等

新聞中心

暫無新聞

產品分類

站內搜索

您當前的位置：首頁 » 供應產品 » Hawke帶膠泥鎧裝防爆格蘭（ICG653/UNIV）

Hawke帶膠泥鎧裝防爆格蘭（ICG653/UNIV）

點擊圖片查看大圖

產 品：	瀏覽次數：134Hawke帶膠泥鎧裝防爆格蘭（ICG653/UNIV）
品牌：	Hawke帶膠泥鎧裝防爆格蘭（ICG653/UNIV）
單價：	面議
最小起訂量：
供貨總量：
發貨期限：	自買家付款之日起 3 天內發貨
更新日期：	2025-03-31 09:19 有效期至：長期有效

詳細信息

Hawke帶膠泥鎧裝防爆格蘭（ICG653/UNIV）
Hawke代理商：上海頤品自動化科技有限公司（Hawke cable gland）
Hawke防爆格蘭，Hawke防爆密封接頭，Hawke防爆堵頭，Hawke防爆變徑，Hawke防爆呼吸閥，Hawke防爆接線箱
Hawke防爆格蘭，Hawke防爆密封接頭，Hawke防爆堵頭，Hawke防爆變徑，Hawke防爆呼吸閥，Hawke防爆接線箱

HAWKE ICG 653/UNIVERSAL CABLE GLANDS

Hazardous Area Cable Glands from Hawke

Hawke ICG 653/Universal cable glands are suitable for use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.

For particular use with:-
a) Cable inner sheaths that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit ‘cold flow’ characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area.

Hawke ICG 653/Universal cable glands are dual certified Exd and Exe and suitable for installation in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC, 5.5-78.0mm outside cable diameters.

When used in increased safety applications the Hawke cable gland can be used to terminate braided cables where the braid and the cable outer sheath enter into the electrical enclosure or junction box.

♦ Exdb IIC Gb, Exe IIC Gb, Extb IIIC, Db Aromoured Cables ATEX & IECEx Cable Gland.

Hawke ICG 653/Universal cable gland is suitable for cable termination and installation in Zone 1 (21), Zone 2 (22) and Division 2 hazardous areas.

Flameproof Exdb
Increased Safety Exeb
Dust Extb
Dual Certified Cable Gland For Hazardous Areas ATEX – IECEx

HAWKE ICG 653/UNIVERSAL CABLE GLAND TECHNICAL SPECIFICATION

Hazardous Area Cable Gland Classification – Exdb IIC Gb, Exeb IIC Gb, Extb IIIC Db
Certificate No’s – baseefa06ATEX0058X and IECEx BAS 06.0015X
Cable Gland Zone Location – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC
Construction and Test Standards – IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31
Ingress Protection – IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X
Deluge Protection – DTS01
Operating Temperature Range -60°C to +80°C

CABLE GLAND SELECtION TABLE FOR HAWKE ICG 653/UNIVERSAL

Hawke Size Ref.	Entry Thread Size			Cable Acceptance Details								‘G’ Compressed Length	Hexagon Dimensions
	Entry Thread Size			Inner Sheath/ Cores				‘B’ Outer Sheath		‘C’ Armour/Braid			Hexagon Dimensions
	Metric	NPT *		‘D’ Max. Over Cores	‘E’ Max. Inner Sheath	NOTE 1 Max. No. Of Cores	NOTE 2 Max. No. Of Cores	‘B’ Outer Sheath		‘C’ Armour/Braid			Across Flats	Across Corners
	Metric	Standard	Option	‘D’ Max. Over Cores	‘E’ Max. Inner Sheath	NOTE 1 Max. No. Of Cores	NOTE 2 Max. No. Of Cores	Min.	Max.	Orientation 1	Orientation 2		Across Flats	Across Corners
Os	M20	½”	–	8.9	10.0	12	6	5.5	12.0	0.8 / 1.25	0 / 0.8	67.0	24.0	26.5
O	M20	½”	–	8.9	10.0	12	6	9.5	16.0	0.8 / 1.25	0 / 0.8	67.0	24.0	26.5
A	M20	¾”	½”	11.0	12.5	15	10	12.5	20.5	0.8 / 1.25	0 / 0.8	67.0	30.0	32.5
B	M25	1″	¾”	16.2	18.4	30	21	16.9	26.0	1.25 / 1.6	0 / 0.7	73.6	36.0	39.5
C	M32	1¼”	1″	21.9	24.7	42	42	22.0	33.0	1.6 / 2.0	0 / 0.7	78.0	46.0	50.5
C2	M40	1½”	1¼”	26.3	29.7	60	60	28.0	41.0	1.6 / 2.0	0 / 0.7	82.4	55.0	60.6
D	M50	2″	1½”	37.1	41.7	80	80	36.0	52.6	1.8 / 2.5	0 / 1.0	88.7	65.0	70.8
E	M63	2½”	2″	47.8	53.3	100	100	46.0	65.3	1.8 / 2.5	0 / 1.0	92.7	80.0	88.0
F	M75	3″	2½”	59.0	66.2/65.3 †	120	120	57.0	78.0	1.8 / 2.5	0 / 1.0	99.4	95.0	104.0

cable lugs available to crimp and terminate cable conductors to ensure complete termination of cable.

CABLE GLAND MATERIAL & FINISH

Hawke ICG 653/Universal cable glands are manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

PREPARING CABLE & GLAND FOR INSTALLING HAWKE ICG 653/UNIVERSAL

Hawke 501 453 RAC Cable & Gland Preparation

CABLE PREPARATION

Strip Cable to suit equipment as shown above and expose the armour/braid ‘I’ removing all cable fillers.

‘I’ = 20mm for cable gland sizes Os to A ‘I’ = 25mm for cable gland sizes B to C2 ‘I’ = 32mm for cable gland sizes D to F ‘II’ to suit equipment. If required, fit shroud.

CABLE GLAND PREPARATION

Push the cable through the armour spigot (4). Spread armour/braid over the armour spigot (4) until the end of the armour/braid is up against the shoulder of the armour cone. Position the armour clamping ring (3).

Remove the inner seal (5) from the entry (6). Place the entry (6) over the armour spigot (4). Move the sub-assembly (1) and (2) up to meet the entry (6).

Hawke Cable Glands to view the complete range of hazardous area glands certified according to ATEX & IECEx for Zone 1 / Zone 2.